Cooktop installation and faulty downlight replacement in St Kilda

Date Published: October 7, 2026, Last Updated on October 14, 2026 by David Briggs

• A St Kilda property needed a new electric cooktop installed and a faulty 90mm downlight replaced.
• Briggs Electrical removed the old cooktop, enlarged the existing benchtop cut-out for the new appliance, installed a new plug base, and connected the new cooktop using the existing power supply.
• The faulty downlight was replaced like-for-like under fault conditions, and the switchboard was checked with no faults found.

A recent electrical job in St Kilda

A recent St Kilda job involved two common household electrical needs in the same visit – appliance installation and lighting fault repair.

The client needed an old cooktop removed and a new cooktop installed. They also had a faulty 90mm downlight that needed to be replaced under fault conditions.

For homeowners, jobs like this can look simple from the outside. However, cooktop installation, plug base installation and downlight replacement still need safe isolation, correct connection and proper testing by a licensed electrician.

Our electricians in St Kilda completed the work using the existing power supply and checked the switchboard as part of the job.

Quick job details

Detail
Location	St Kilda, VIC
Service	Cooktop installation and downlight replacement
Job type	Residential electrical work
Timeframe	Completed last week
Work completed	1 cooktop removed, 1 new cooktop installed, 1 plug base installed, 1 faulty 90mm downlight replaced
Result	New cooktop fitted, faulty downlight replaced, existing power reused, switchboard checked and no faults found

The issue

The client needed a new cooktop installed at their St Kilda property. The existing cooktop had to be removed, and the new appliance needed to fit safely into the existing benchtop space.

At the same time, the property had a faulty 90mm downlight that needed to be replaced like-for-like under fault conditions.

Before completing the work, Briggs Electrical also checked the switchboard. It looked okay, and no faults were found.

The work completed

Briggs Electrical removed the old cooktop and prepared the area for the new appliance.

The new cooktop required a slightly larger opening, so the existing benchtop cut-out was carefully enlarged for correct fitment. A new plug base was installed, and the new cooktop was connected using the existing power supply.

The faulty 90mm downlight was also replaced like-for-like, restoring safe and functional lighting in the area.

The result

The St Kilda property now has a newly installed cooktop and a replacement downlight.

The existing power supply was reused, the switchboard was checked, and no further faults were found during the job.

This gave the client a practical result in one visit – a working cooktop, restored lighting and confidence that the switchboard did not show signs of a related issue.

Why a licensed electrician matters for this type of work

Cooktop replacements and lighting repairs should be handled carefully, even when they appear straightforward.

A licensed electrician can safely isolate the circuit, check the existing supply, install the plug base, connect the appliance correctly and test the work before it is used.

The same applies to faulty downlights. Replacing a fitting like-for-like may sound simple, but when a light has failed under fault conditions, proper testing matters. Briggs Electrical can help with electrical fault repairs across St Kilda and surrounding Melbourne suburbs, including urgent faults that need prompt attention.

Photos from the job

Need an electrician in St Kilda?

Briggs Electrical provides residential and commercial electrical services across St Kilda and surrounding Melbourne suburbs.

Whether you need a cooktop installed, a faulty downlight replaced, a plug base installed or an electrical fault checked, our team can help.

Contact Briggs Electrical or call 1300 300 222.